Login
Login

Free 500-220 Practice Test Questions 2026

57 Questions


Last Updated On : 26-Mar-2026


Facing the Engineering Cisco Meraki Solutions v1.0 exam in 2026 is challenging, but preparing with the right tools makes all the difference. Our 500-220 practice test isn't just another set of questions. It's your strategic advantage for conquering the certification. Candidates who complete our 500-220 practice questions are approximately 35% more likely to pass the exam on their first attempt compared to those who study without realistic Engineering Cisco Meraki Solutions v1.0 practice exam. This isn't coincidence. It's the power of effective preparation.

Which design requirement is met by implementing syslog versus SNMP?


A.

when automation capabilities are needed


B.

when proactive alerts for critical events must be generated


C.

when organization-wide information must be collected


D.

when information such as flows and client connectivity must be gathered





D.   

when information such as flows and client connectivity must be gathered



Reference:
https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/
Meraki_Device_Reporting_-_Syslog%2C_SNMP%2C_and_API

When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)


A.

Controller disconnection behavior


B.

Captive Portal strength


C.

Simultaneous logins


D.

Firewall & traffic shaping


E.

RADIUS for splash page settings





A.   

Controller disconnection behavior



B.   

Captive Portal strength



Reference: https://documentation.meraki.com/MR/Access_Control

For which two reasons can an organization become “Out of License”? (Choose two.)


A.

licenses that are in the wrong network


B.

more hardware devices than device licenses


C.

expired device license


D.

licenses that do not match the serial numbers in the organization


E.

MR licenses that do not match the MR models in the organization





B.   

more hardware devices than device licenses



C.   

expired device license



Reference:
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FA
Qs

Refer to the exhibit.

For an AP that displays this alert, which network access control method must be in use?


A.

preshared key


B.

WPA2-enterprise with my RADIUS server


C.

splash page with my RADIUS server


D.

MAC-based access control with RADIUS server





A.   

preshared key



Which type of authentication protocol is used when using OSPF on an MX appliance?


A.

MD5


B.

certificate


C.

plaintext


D.

SHA-1





A.   

MD5



Reference: https://documentation.meraki.com/MX/Site-to-site_VPN/
Using_OSPF_to_Advertise_Remote_VPN_Subnets

Which information is used to calculate whether a WAN link has high usage?


A.

data under Security & SD WAN > Appliance Status > Uplink > Live Data


B.

total historical throughput of an uplink


C.

total number of devices that are actively passing traffic


D.

value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration





D.   

value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration



A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in
the event log and do not install the application.
What does the “NotNow” event indicate?


A.

The application requires the most recent iOS version.


B.

The device is locked with a passcode.


C.

The device cannot connect to Apple servers.


D.

The device cannot connect to Cisco Meraki servers.





B.   

The device is locked with a passcode.



Reference: https://community.meraki.com/t5/Mobile-Device-Management/Check-NotNow-
Status/td-p/3887

In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)


A.

Renew the Dashboard license.


B.

License a network.


C.

License more devices.


D.

Call Meraki support.


E.

Wait for the devices to auto-renew





A.   

Renew the Dashboard license.



C.   

License more devices.



Reference:
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Co-
Termination_Licensing_Overview

Which requirement is needed to implement Fast Lane on Cisco Meraki APs?


A.

wireless profile installed on an Apple iOS device


B.

wireless profile installed on a Cisco iOS access point


C.

adaptive 802.11r disabled


D.

traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com





A.   

wireless profile installed on an Apple iOS device



Reference: https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/
Wireless_QoS_and_Fast_Lane

What are two ways peers interact with ports that Auto VPN uses? (Choose two.)


A.

For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.


B.

Peers contact the VPN registry at UDP port 9350.


C.

For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.


D.

Peers contact the VPN registry at TCP port 9350.


E.

For IPsec tunneling, peers use UDP ports 500 and 4500.





B.   

Peers contact the VPN registry at UDP port 9350.



C.   

For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.



Reference: https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_-
_Configuration_and_Troubleshooting

Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)


A.

Currently associated clients stay connected.


B.

New clients can connect.


C.

Currently associated clients are affected by restrictive traffic shaping rules.


D.

New clients cannot connect.


E.

Currently associated clients are disconnected.





D.   

New clients cannot connect.



F.   

Refer to the exhibit

What is the minimal Cisco Meraki Insight licensing requirement?


A.

A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.


B.

A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.


C.

A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.


D.

Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.


E.

Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.





E.   

Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.




Page 1 out of 5 Pages
Next
12

What Makes Our Engineering Cisco Meraki Solutions v1.0 Practice Test So Effective?

Real-World Scenario Mastery: Our 500-220 practice exam don't just test definitions. They present you with the same complex, scenario-based problems you'll encounter on the actual exam.

Strategic Weakness Identification: Each practice session reveals exactly where you stand. Discover which domains need more attention, before Engineering Cisco Meraki Solutions v1.0 exam day arrives.

Confidence Through Familiarity: There's no substitute for knowing what to expect. When you've worked through our comprehensive 500-220 practice exam questions pool covering all topics, the real exam feels like just another practice session.

Copyright © All Rights Reserved