Free 500-220 Practice Test Questions 2026

Refer to the exhibit.

Which IDS/IPS mode is the MX Security Appliance configured for?

A.

quarantine

B.

prevention

C.

detection

D.

blocking

Refer to the exhibit.

During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?

A.

An AP does not have a wired connection to the network.

B.

An AP cannot connect to the default gateway.

C.

An AP has never connected to the Meraki Cloud Controller.

D.

An AP has Site Survey mode enabled.

A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.How many tunnels does each hub need to support?

A.

52

B.

54

C.

100

D.

104

Refer to the exhibit.

Which outcome occurs when logging is set to Enabled?

A.

Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.

B.

The hits counter within this section is now enabled.

C.

This firewall rule is now enabled.

D.

Inbound flows are sent to a configured syslog server if a syslog server configured for flows.

Refer to the exhibit.

Which design recommendation should be considered?

A.

A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice
recommends a 1-hop maximum.

B.

A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice
recommends a 2-hop maximum.

C.

A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice
recommends a 1-hop maximum.

D.

A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice
recommends a 2-hop maximum.

Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager. Which outcome occurs when a user attempts to remove the “Meraki Management” profile on an iPad?

A.

The “Meraki Management” profile cannot be removed.

B.

The “Meraki Management” profile is removed and then pushed automatically by
Systems Manager.

C.

The “Meraki Management” profile is removed. All the profiles that Systems Manager pushed are also removed.

D.

The “Meraki Management” profile is removed. All the profiles Systems Manager pushed remain.

Refer to the exhibit

What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

A.

1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.

B.

100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.

C.

100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.

D.

1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)

A.

OS updates

B.

Send notification

C.

Selective wipe

D.

Screenshot

E.

Remote Desktop

Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

A.

MS Switch

B.

Meraki Insight

C.

MR Access Point

D.

MV Smart Camera

A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?

A.

zone exclusion

B.

privacy window

C.

area or interest

D.

sensor crop

E.

restricted mode

Refer to the exhibit.

The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?

A.

Add a deny any/any firewall rule to the end of the firewall rules.

B.

Remove the connection from Internet 1.

C.

Physically disconnect all LAN ports.

D.

Configure the MX appliance to Routed mode on the Addressing & VLANS page.

Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?

A.

starts on the secondary MX appliance and then occurs on the primary MX appliance

B.

starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases

C.

starts on both MX appliances at the same time and then immediately reboots both appliances

D.

starts on the primary MX appliance and then occurs on the secondary MX appliance