Free 300-710 Practice Test Questions 2026

420 Questions


Last Updated On : 19-Nov-2026


Topic 1: Deployment

An analyst is investigating a potentially compromised endpoint within the network and pulls a host report for the endpoint in question to collect metrics and documentation. What information should be taken from this report for the investigation?


A. client applications by user, web applications, and user connections


B. number of attacked machines, sources of the attack, and traffic patterns


C. intrusion events, host connections, and user sessions


D. threat detections over time and application protocols transferring malware





C.
  intrusion events, host connections, and user sessions

Explanation:

When an analyst is investigating a potentially compromised endpoint and pulls a Host Report, the goal is to gather comprehensive metrics about that specific host's activity and security posture. The Cisco FMC Host Report includes several sections that provide critical investigative data:

Intrusion Events: This shows any IPS or Snort events associated with the host, indicating if it has been targeted by or is originating attacks.

Host Connections: This details the network connections initiated by or involving the host, helping identify command-and-control (C2) traffic or lateral movement.

User Sessions: This lists the users who have logged into or used the host, which is crucial for tracking account compromise and identifying the human element behind the activity.

These elements provide a complete picture of the endpoint's behavior, making it the correct choice for a compromise investigation.

Why the Other Options Are Incorrect

A. client applications by user, web applications, and user connections: While these are useful for general traffic analysis, they are not the primary sections of a Host Report that indicate compromise. This option is a distractor that mixes up general application data.

B. number of attacked machines, sources of the attack, and traffic patterns: This information is more aligned with a Network Risk Report or an Attacks Risk Report, which provide a high-level view of attack trends across the network, rather than focusing on a single endpoint.

D. threat detections over time and application protocols transferring malware: This sounds like a combination of features from the Advanced Malware Risk Report and file analysis tools, not the standard sections provided in the Host Report for a single endpoint.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Host Report Templates, which lists the sections included in the Host Report (Intrusion Events, Host Connections, User Sessions, etc.).

An engineer attempts to pull the configuration for a Cisco FTD sensor to review with Cisco TAC but does not have direct access to the CU for the device. The CLl for the device is managed by Cisco FMC to which the engineer has access. Which action in Cisco FMC grants access to the CLl for the device?


A. Export the configuration using the Import/Export tool within Cisco FMC.


B. Create a backup of the configuration within the Cisco FMC.


C. Use the show run all command in the Cisco FTD CLI feature within Cisco FMC


D. Download the configuration file within the File Download section of Cisco FMC.





C.
  Use the show run all command in the Cisco FTD CLI feature within Cisco FMC

Explanation:

When a Cisco Firepower Threat Defense (FTD) device is managed by a Cisco Firepower Management Center (FMC), the engineer may not have direct console or SSH access to the FTD's CLI. However, the FMC provides a built-in CLI tool for each managed FTD device.

To review the full running configuration of the FTD sensor without direct device access, the engineer can navigate to the device in the FMC, open the CLI interface (often found under the device's advanced options or via the "Open CLI" feature), and execute the show run all command. This command outputs the complete, unabbreviated running configuration directly in the FMC web interface, which can then be copied and shared with Cisco TAC.

Why the Other Options Are Incorrect

A. Export the configuration using the Import/Export tool within Cisco FMC: The Import/Export tool is used for exporting FMC configuration objects (like policies and objects) for backup or transfer to another FMC. It does not export the raw CLI configuration of a managed FTD device.

B. Create a backup of the configuration within the Cisco FMC: Creating a backup generates an encrypted archive file (.tar) for disaster recovery. It does not provide a readable configuration file that an engineer can review with TAC.

D. Download the configuration file within the File Download section of Cisco FMC: There is no direct "File Download" section in the FMC to download the running configuration of an FTD sensor. The configuration must be viewed via the CLI tool.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on FTD CLI Access via FMC, which explains how to use the built-in CLI tool to run commands like show run on managed devices.

An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?


A. Use a dedicated IPS inline set for each department to maintain traffic separation


B. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation


C. Use passive IDS ports for both departments


D. Use one pair of inline set in TAP mode for both departments





B.
  Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation

Explanation

To maintain data privacy and logical separation between two separate departments (sales and product development) while using the same physical Cisco FTD appliance, you should use VLANs.

By configuring the inline interfaces as 802.1Q trunks, the FTD can receive and inspect traffic from both departments while keeping them logically separated using VLAN tags. You can then assign these VLANs to different Security Zones and apply separate Access Control Policies and inspection rules for each department. This ensures that the traffic is inspected securely and data privacy is maintained without the cost and complexity of dedicated physical appliances for each department.

Why the Other Options Are Incorrect

A. Use a dedicated IPS inline set for each department to maintain traffic separation:
While this provides physical separation, it is an expensive and inefficient use of hardware. It consumes two dedicated physical interfaces per department. VLAN trunking is the standard and scalable method for logical separation.

C. Use passive IDS ports for both departments:
Passive IDS ports only monitor a copy of the traffic; they do not sit in the traffic path, and they do not provide a mechanism for enforcing policy (like blocking) or active privacy enforcement.

D. Use one pair of inline set in TAP mode for both departments:
TAP mode (inline tap) is used for passive monitoring of traffic on an inline set without dropping packets. It does not provide logical traffic separation (privacy) between different networks, as the traffic is just aggregated and inspected.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Inline Sets and VLAN Tagging, which explains how to configure inline interfaces as trunks to inspect multiple VLANs while maintaining separation.

An administrator is configuring their transparent Cisco FTD device to receive ERSPAN
traffic from multiple switches on a passive port, but the Cisco FTD is not processing the
traffic. What is the problem?


A.

The switches do not have Layer 3 connectivity to the FTD device for GRE traffic
transmission.


B.

The switches were not set up with a monitor session ID that matches the flow ID defined
on the Cisco
FTD.


C.

The Cisco FTD must be in routed mode to process ERSPAN traffic


D.

The Cisco FTD must be configured with an ERSPAN port not a passive port.





D.
  

The Cisco FTD must be configured with an ERSPAN port not a passive port.



Explanation

In Cisco Firepower Threat Defense (FTD), receiving ERSPAN (Encapsulated Remote Switched Port Analyzer) traffic requires a specific interface configuration. ERSPAN encapsulates mirrored traffic into GRE (Generic Routing Encapsulation) packets.

An FTD interface configured as a standard Passive interface does not have the capability to decapsulate GRE or process ERSPAN traffic; it only expects raw Ethernet frames. To receive and inspect ERSPAN traffic, the interface must be explicitly configured as an ERSPAN passive interface (or ERSPAN port) in the FMC. The FTD uses this dedicated mode to terminate the GRE tunnel, decapsulate the traffic, and pass the inner packets to the Snort engine for inspection.

Why the Other Options Are Incorrect

A. The switches do not have Layer 3 connectivity to the FTD device for GRE traffic transmission:
While Layer 3 connectivity is necessary for ERSPAN, the question states the traffic is being sent but not processed. The immediate issue is the FTD interface configuration, not the underlying routing.

B. The switches were not set up with a monitor session ID that matches the flow ID defined on the Cisco FTD:
FTD does not require a matching session ID or flow ID to process ERSPAN; it processes the GRE encapsulated packets based on the interface configuration.

C. The Cisco FTD must be in routed mode to process ERSPAN traffic:
ERSPAN is a passive monitoring technology and is supported in transparent mode (and routed mode). The firewall mode is not the limiting factor here; the interface type is.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on ERSPAN Passive Interfaces, which explains that an interface must be configured specifically as an ERSPAN passive interface to receive and process ERSPAN traffic.

An engineer configures an access control rule that deploys file policy configurations to security zones or tunnel zones, and it causes the device to restart. What is the reason for the restart?


A. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.


B. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.


C. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.


D. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.





C.
  Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.

Explanation:

In Cisco Firepower Management Center (FMC), when you configure an Access Control Policy (ACP) rule that includes a File Policy and applies it to specific Security Zones or Tunnel Zones, the FMC validates the configuration against the deployed devices. If the rule references a Security Zone or a source Tunnel Zone that is not associated with any interface (or tunnel rule) on the target FTD devices, the FMC cannot compile the policy correctly for those devices.

To resolve this and ensure the File Policy is applied correctly, the FMC forces a restart/reload of the Snort inspection process on the target devices. This restart is triggered because the policy references zones that do not exist in the device's logical topology, causing the deployment to invalidate the existing inspection state and require a fresh reload to apply the corrected mappings.

Why the Other Options Are Incorrect:

A. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices: This is the correct configuration. A match means the policy is valid and would not cause a restart. The restart happens due to a mismatch.

B. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy: This describes a valid policy structure where the tunnel zone is defined, which does not inherently cause a restart. The issue is the mismatch between the rule's zones and the device's interfaces.

D. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy: Similar to B, this describes an internal policy configuration check. The root cause of the device restart is the mismatch between the zones defined in the rule and the actual interfaces on the target device.

Reference:

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Access Control Policy Configuration, which details how FMC validates Security Zones and Tunnel Zones against target device interfaces and triggers a Snort restart upon mismatches.

A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?


A. The destination MAC address is optional if a VLAN ID value is entered


B. Only the UDP packet type is supported


C. The output format option for the packet logs unavailable


D. The VLAN ID and destination MAC address are optional





A.
  The destination MAC address is optional if a VLAN ID value is entered

Explanation:

In a Cisco Firepower Threat Defense (FTD) device operating in transparent firewall mode, a packet trace can be performed to simulate how a packet would be handled. When the ingress interface is a VTEP bridge group member, the device expects to receive VXLAN-encapsulated traffic.


To properly trace a packet through a VTEP interface, the system needs to know how to route the inner frame. If you specify the VLAN ID of the inner frame, the FTD can use the bridge group's MAC address table to determine the destination MAC address. Therefore, when a VLAN ID is provided, the destination MAC address is optional; the system can resolve it based on the VLAN context. If no VLAN ID is provided, the destination MAC address must be specified.

Why the Other Options Are Incorrect:

B. Only the UDP packet type is supported: This is incorrect. The packet trace feature supports TCP, UDP, and ICMP packet types.

C. The output format option for the packet logs unavailable:
This is incorrect. The packet trace feature provides a detailed output showing the packet's path through the different inspection phases (e.g., prefilter, access control, NAT, etc.), and the output is available in the FMC interface.

D. The VLAN ID and destination MAC address are optional:
This is incorrect. While the destination MAC address can be optional if a VLAN ID is provided, the VLAN ID itself is not optional for a VTEP interface; it is required to define the inner frame context for the trace.

Reference:

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Packet Tracer, which explains the requirements for source/destination MAC addresses and VLAN IDs, specifically for VTEP/transparent mode deployments.

Due to an Increase in malicious events, a security engineer must generate a threat report to include intrusion events, malware events, and security intelligence events. How Is this information collected in a single report?


A. Run the default Firepower report


B. Export the Attacks Risk report.


C. Generate a malware report


D. Create a Custom report





D.
  Create a Custom report

Explanation:

In Cisco Firepower Management Center (FMC), the default and predefined report templates (such as the Firepower Report, Attacks Risk Report, and Malware Report) focus on specific data sets. For example, an Attacks Risk Report focuses on IPS events, while a Malware Report focuses on file and malware dispositions.

To generate a single report that consolidates different types of data—specifically intrusion events, malware events, and security intelligence events—the security engineer must create a Custom Report. FMC's Custom Reports allow you to build a report from scratch, selecting multiple different sections and data views (e.g., Intrusion Events, Malware Events, Security Intelligence Events) and combining them into one consolidated report.

Why the Other Options Are Incorrect:

A. Run the default Firepower report:
The default Firepower Report is a high-level summary of network traffic and top applications, but it does not specifically aggregate detailed intrusion, malware, and SI events into a single view.

B. Export the Attacks Risk report:
The Attacks Risk Report focuses specifically on intrusion and attack-related events. It does not include malware events or Security Intelligence events, so it does not meet the requirement of a single consolidated report.

C. Generate a malware report:
The Malware Report focuses exclusively on file analysis and malware detections. It does not include intrusion events or SI events.

Reference:

Cisco Documentation:"Cisco Firepower Management Center Configuration Guide" – Section on Custom Reports, which explains how to create a report by selecting specific sections (Intrusion Events, Malware Events, etc.) to meet specific reporting requirements.

An engineer wants to connect a single IP subnet through a Cisco FTD firewall and enforce policy. There is a requirement to present the internal IP subnet to the outside as a different IP address. What must be configured to meet these requirements?


A. Configure the downstream router to perform NAT


B. Configure the upstream router to perform NAT.


C. Configure the Cisco FTD firewall in routed mode with NAT enabled.


D. Configure the Cisco FTD firewall in transparent mode with NAT enabled.





D.
  Configure the Cisco FTD firewall in transparent mode with NAT enabled.

Explanation:

To connect a single IP subnet through a Cisco FTD while keeping the internal hosts on the same subnet (Layer 2), the firewall must operate in transparent mode. Transparent mode acts as a "bump in the wire" and does not require readdressing the internal network.

Because the requirement also states that the internal IP subnet must be presented to the outside as a different IP address, NAT (Network Address Translation) must be configured. Cisco FTD in transparent mode fully supports NAT policies. The FTD will bridge the Layer 2 traffic internally while translating the source IP addresses for traffic heading to the outside interface.

Why the Other Options Are Incorrect:

A. Configure the downstream router to perform NAT:
If the downstream router performs NAT, the FTD would only see the translated traffic, not the original internal subnet. Additionally, the scenario describes connecting a subnet through the FTD, making the FTD the logical point for translation.

B. Configure the upstream router to perform NAT:
While possible in some designs, the requirement is to configure the FTD to meet the requirements. Performing NAT on the upstream router means the FTD is not enforcing the translation policy, which defeats the purpose of a centralized security policy.

C. Configure the Cisco FTD firewall in routed mode with NAT enabled:
Routed mode requires the internal and external interfaces to be on different IP subnets, and the FTD acts as the default gateway. If the requirement is to connect a single IP subnet through the firewall without changing its subnet, routed mode would require readdressing the internal network, which is not desired here.

Reference:

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Transparent Mode and NAT, which confirms that NAT can be configured on a transparent FTD to translate IP addresses while bridging traffic.

What is a feature of Cisco AMP private cloud?


A. It supports anonymized retrieval of threat intelligence


B. It supports security intelligence filtering.


C. It disables direct connections to the public cloud.


D. It performs dynamic analysis





C.
  It disables direct connections to the public cloud.

Explanation:

The Cisco AMP Private Cloud is an on-premises appliance (virtual or hardware) that provides the same file reputation and analysis capabilities as the public AMP cloud, but within an organization's own network. Because the private cloud is designed for highly secure or air-gapped environments, it disables direct connections to the public AMP cloud.

All file lookups, dispositions, and threat intelligence are handled locally by the private cloud appliance. The FTD devices or AMP for Endpoints connectors point to the private cloud instead of the public cloud, ensuring that no sensitive file data or telemetry is sent outside the organization's perimeter. (Note: The private cloud can still receive periodic updates from Cisco Talos via a secure, outbound-only connection, but it does not maintain a direct, real-time connection to the public AMP cloud for file queries).

Why the Other Options Are Incorrect:

A. It supports anonymized retrieval of threat intelligence: While privacy is a benefit, the specific technical feature is the isolation from the public cloud. Anonymized retrieval is a broader concept, not the defining feature of the private cloud.

B. It supports security intelligence filtering: Security Intelligence (SI) filtering is a function of the FMC/FTD (blocking IPs/URLs), not a specific feature of the AMP private cloud appliance.

D. It performs dynamic analysis:
Dynamic analysis (sandboxing) is handled by Cisco Threat Grid (which can be integrated as an on-premises appliance or cloud service). The AMP private cloud primarily handles file reputation lookups and static analysis, not full dynamic sandboxing.

Reference:

Cisco Documentation: "Cisco AMP Private Cloud Appliance User Guide" – Section on deployment architecture, which explains that the private cloud operates independently of the public AMP cloud.

A network administrator is implementing an active/passive high availability Cisco FTD pair. When adding the high availability pair, the administrator cannot select the secondary peer. What is the cause?


A. The second Cisco FTD is not the same model as the primary Cisco FTD.


B. An high availability license must be added to the Cisco FMC before adding the high availability pair.


C. The failover link must be defined on each Cisco FTD before adding the high availability pair.


D. Both Cisco FTD devices are not at the same software Version





D.
  Both Cisco FTD devices are not at the same software Version

Explanation

In Cisco Firepower Threat Defense (FTD), receiving ERSPAN (Encapsulated Remote Switched Port Analyzer) traffic requires a specific interface configuration. ERSPAN encapsulates mirrored traffic into GRE (Generic Routing Encapsulation) packets.

An FTD interface configured as a standard Passive interface does not have the capability to decapsulate GRE or process ERSPAN traffic; it only expects raw Ethernet frames. To receive and inspect ERSPAN traffic, the interface must be explicitly configured as an ERSPAN passive interface (or ERSPAN port) in the FMC. The FTD uses this dedicated mode to terminate the GRE tunnel, decapsulate the traffic, and pass the inner packets to the Snort engine for inspection.

Why the Other Options Are Incorrect

A. The switches do not have Layer 3 connectivity to the FTD device for GRE traffic transmission:
While Layer 3 connectivity is necessary for ERSPAN, the question states the traffic is being sent but not processed. The immediate issue is the FTD interface configuration, not the underlying routing.

B. The switches were not set up with a monitor session ID that matches the flow ID defined on the Cisco FTD:
FTD does not require a matching session ID or flow ID to process ERSPAN; it processes the GRE encapsulated packets based on the interface configuration.

C. The Cisco FTD must be in routed mode to process ERSPAN traffic:
ERSPAN is a passive monitoring technology and is supported in transparent mode (and routed mode). The firewall mode is not the limiting factor here; the interface type is.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on ERSPAN Passive Interfaces, which explains that an interface must be configured specifically as an ERSPAN passive interface to receive and process ERSPAN traffic.

An administrator receives reports that users cannot access a cloud-hosted web server. The access control policy was recently updated with several new policy additions and URL filtering. What must be done to troubleshoot the issue and restore access without sacrificing the organization's security posture?


A. Create a new access control policy rule to allow ports 80 and 443 to the FQDN of the web server


B. Identify the blocked traffic in the Cisco FMC connection events to validate the block, and modify the policy to allow the traffic to the web server.


C. Verify the blocks using the packet capture tool and create a rule with the action monitor for the traffic.


D. Download a PCAP of the traffic attempts to verify the blocks and use the flexconfig objects to create a rule that allows only the required traffic to the destination server.





B.
  Identify the blocked traffic in the Cisco FMC connection events to validate the block, and modify the policy to allow the traffic to the web server.

Explanation:

B. Identify the blocked traffic in the Cisco FMC connection events to validate the block, and modify the policy to allow the traffic to the web server.

When an access control policy is updated with new rules and URL filtering, legitimate traffic can sometimes be inadvertently blocked due to a misconfigured rule, application detection issues, or URL categorization errors. To troubleshoot and restore access without sacrificing security, the administrator must first identify the specific block action that is dropping the traffic.

The Cisco FMC Connection Events dashboard provides detailed logs of every connection, including the exact Access Control rule that blocked it and the reason (e.g., URL category, application, or security intelligence). By reviewing these events, the administrator can validate why the traffic is being blocked. Once identified, they can modify the specific policy rule (e.g., allow the FQDN, adjust the URL category, or create an exception) to restore access while keeping the rest of the security posture intact.

Why the Other Options Are Incorrect:

A. Create a new access control policy rule to allow ports 80 and 443 to the FQDN of the web server: While this might restore access, creating a broad new rule without first identifying the root cause violates the principle of least privilege and could potentially bypass intended security controls. Troubleshooting first is the correct methodology.

C. Verify the blocks using the packet capture tool and create a rule with the action monitor for the traffic: Packet capture is a data plane tool and is not the primary method for identifying why a policy blocked traffic. Additionally, changing the action to "Monitor" does not restore access; it only logs the traffic while still blocking it.

D. Download a PCAP of the traffic attempts to verify the blocks and use the flexconfig objects to create a rule that allows only the required traffic to the destination server: Using FlexConfig to create an access control rule is incorrect (FlexConfig is for CLI-level features not supported in the GUI). The standard FMC Access Control Policy should be used, and Connection Events are the correct tool for troubleshooting.

Reference:

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Connection Events and Troubleshooting Access Control Policies.

An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?


A. event viewer


B. reports


C. dashboards


D. context explorer





B.
  reports

Explanation

In Cisco Firepower Management Center (FMC), the Reports feature is the correct mechanism for generating automated, scheduled summaries of network activity and sending them to stakeholders.

Reports can be customized to include application usage statistics (e.g., top applications by traffic volume, user, or risk). Once the report template is created, the administrator can configure a schedule (e.g., monthly) and set up email delivery to automatically send the report to management.

Why the Other Options Are Incorrect

A. event viewer:
The event viewer is used for real-time or historical troubleshooting and forensic analysis of specific events (like connection, intrusion, or malware events). It is not designed for scheduled, high-level summary reporting to management.

C. dashboards:
Dashboards provide a real-time, visual overview of current network activity. While useful for active monitoring, they do not automatically generate and email monthly summary documents.

D. context explorer:
The Context Explorer is an interactive analysis tool that allows you to drill down into network data visually. It does not have a built-in scheduling or automated email delivery feature for monthly management reports.

Reference

Cisco Documentation: "Cisco Firepower Management Center Configuration Guide" – Section on Reports, which explains how to create, schedule, and email reports for automated delivery.


Page 16 out of 35 Pages
PreviousNext
1112131415161718192021
300-710 Practice Test Home

What Makes Our Securing Networks with Cisco Firepower (300-710 SNCF) Practice Test So Effective?

Real-World Scenario Mastery: Our 300-710 practice exam don't just test definitions. They present you with the same complex, scenario-based problems you'll encounter on the actual exam.

Strategic Weakness Identification: Each practice session reveals exactly where you stand. Discover which domains need more attention, before Securing Networks with Cisco Firepower (300-710 SNCF) exam day arrives.

Confidence Through Familiarity: There's no substitute for knowing what to expect. When you've worked through our comprehensive 300-710 practice exam questions pool covering all topics, the real exam feels like just another practice session.