Free 300-410 Practice Test Questions 2026

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit.

Which two commands provide the administrator with the information needed to resolve the issue? (Choose two.)

A.

snmp user

B.

debug snmp engine-id

C.

debug snmpv3 engine-id

D.

debug snmp packet

E.

showsnmpv3 user

Refer to the exhibit. After recovering from a power failure. Ethernet0/1 stayed down while Ethernet0/0 returned to the up/up state The default route through ISP1 was not reinstated m the routing table until Ethernet0/1 also came up Which action resolves the issue?

A.

Reference the track object 1 in both static default routes

B.

Remove the references to the interface names from both static default routes

C.

Configure the default route through ISP1 with a higher administrative distance than 2.

D.

Add a static route to the 8 8.8 8/32 destination through the next hop 203.0.113.1

Refer to the exhibit.

A network administrator configured name resolution for IPv6 traffic to be allowed through an inbound access list. After the access list is applied to resolve the issue, name resolution still did not work. Which action does the network administrator take to resolve the name resolution problem?

A.

Remove ipv6 inspect ipv6-firewall in from interface gi0/1

B.

Add permit udp any eq domain any log in the access list.

C.

inspect ipv6 inspect name ipv6-firewall udp 53 in global config.

D.

Add permit any eq domain 53 any log in the access list.

Refer to the exhibit. Which action limits the access to R2 from 192.168.12.1?

A.

Swap sequence 10 with sequence 20 in access-list 100.

B.

Modify sequence 20 to permit tcp host 192.168.12.1 eq 22 any to access-list 100

C.

Swap sequence 20 with sequence 10 in access-list 100

D.

Modify sequence 10 to deny tcp any eq 22 any to access-list 100.

An engineer failed to run diagnostic commands on devices using Cisco DNA Center. Which action in Cisco DNA Center resolves the issue?

A.

Enable Command Runner

B.

Enable APIs

C.

Enable CDP

D.

Enable Secure Shell

Refer to the exhibit. R2 can access content on the server successfully. A network engineer finds packet drops on PC1 for traffic destined to network 2.2.2.2/32. Which action resolves the issue? 

A.

Redistribute the static metric in EIGRP.

B.

Add the eigrp stub connected static command.

C.

Redistribute the connected metric in EIGRP.

D.

Remove the eigrp stub connected command.

Refer to the exhibit.

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit. An engineer must configure a per VRF for TACACS+ for company A. Which configuration on RTG-1 accomplishes the task?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Which command will resolve this problem when WAN connectivity is down?

A.

aaa authentication login default group tacacs+ local

B.

aaa authentication login default group tacacs+ enable

C.

aaa authentication login default group tacacs+ console

D.

aaa authentication login console group tacacs+ enable

Refer to the exhibit. An engineer is trying to log in to R1 via R3 loopback address. Which action resolves the issue?

A.

Add transport input SCP

B.

Add transport input none

C.

Remove the IPv6 traffic filter from R1, which is blocking the Telnet.

D.

Remove the IPv6 traffic from R1, which is blocking the SSH

Refer to the exhibit.

R1 and R2 are configured for EIGRP peering using authentication and the neighbors failed to come up. Which action resolves the issue?

A.

Configure a matching key-id number on both routers

B.

Configure a matching lowest key-id on both routers

C.

Configure a matching key-chain name on both routers

D.

Configure a matching authentication type on both router