Refer to the exhibit.

Which interface configuration must be configured on the HUB router to enable MVPN with mGRE mode?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit.

Which two actions should be taken to access the server? (Choose two.)

A.

Modify the access list to add a second line of permit ip any

B.

Modify the access list to deny the route to 192.168.2.2.

C.

Modify distribute list seq 10 to permit the route to 192.168.2.2.

D.

Add a sequence 20 in the route map to permit access list 1.

E.

Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF

Refer to the exhibit.

The network administrator configured redistribution on an ASBR to reach to all WAN networks but failed Which action resolves the issue?

A.

The route map must have the keyword prefix-list to evaluate the prefix list entries

B.

The OSPF process must have a metric when redistributing prefixes from EIGRP.

C.

The route map EIGRP->OSPF must have the 10.0.106.0/24 entry to exist in one of the three prefix lists to pass

D.

EIGRP must redistribute the 10.0.106.0/24 route instead of using the network statement

What are two purposes of using IPv4 and VPNv4 address-family configurations in a Layer 3 MPLS VPN? (Choose two.)

A.

The VPNv4 address is used to advertise the MPLS VPN label.

B.

RD is prepended to the IPv4 route to make it unique.

C.

MP-BGP is used to allow overlapping IPv4 addresses between customers to advertise through the network.

D.

The IPv4 address is needed to tag the MPLS label.

E.

The VPNv4 address consists of a 64-bit route distinguisher that is prepended to the IPv4 prefix.

An engineer configured access list NON-CISCO in a policy to influence routes

What are the two effects of this route map configuration? (Choose two.)

A.

Packets are not evaluated by sequence 10.

B.

Packets are evaluated by sequence 10.

C.

Packets are forwarded to the default gateway.

D.

Packets are forwarded using normal route lookup.

E.

Packets are dropped by the access list.

An engineer must configure a Cisco router to initiate secure connections from the router to other devices in the network but kept failing. Which two actions resolve the issue? (Choose two.)

A.

Configure a source port for the SSH connection to initiate

B.

Configure a TACACS+ server and enable it

C.

Configure transport input ssh command on the console

D.

Configure a domain name

E.

Configure a crypto key to be generated

An engineer is troubleshooting on the console session of a router and turns on multiple debug commands. The console screen is filled with scrolling debug messages that none of the commands can be verified if entered correctly or display any output. Which action allows the engineer to see entered console commands while still continuing the analysis of the debug messages?

A.

Configure the logging synchronous command

B.

Configure the no logging console debugging command globally

C.

Configure the logging synchronous level all command

D.

Configure the term no mon command globally

Refer to the exhibit.

A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?

A.

Configure to match the OSPF interface speed and duplex settings on both routers.

B.

Configure to match the OSPF interface MTU settings on both routers.

C.

Configure to match the OSPF interface unique IP address and subnet mask on both routers.

D.

Configure to match the OSPF interface network types on both routers.

Refer to the exhibit.

While troubleshooting an EIGRP neighbor adjacency problem, the network engineer notices that the interface connected to the neighboring router is not participating in the EIGRP process. Which action resolves the issues?

A.

Configure the network command to network 172.16.0.1 0.0.0.0

B.

Configure the network command under EIGRP address family vrf CLIENT

C.

Configure EIGRP metrics on interface FastEthernet0/3

D.

Configure the network command under EIGRP address family ipv4

Which two protocols work in the control plane of P routers across the MPLS cloud? (choose two)

A.

LSP

B.

RSVP

C.

ECMP

D.

LDP

E.

MPLS OAM

Refer to the exhibit. A network administrator redistributed the default static route into OSPF toward all internal routers to reach to Internet. Which set of commands restores reachability to the Internet by internal routers?

A.

router ospf 1
default-information originate

B.

router ospf 1
network 0.0.0.0 0.0.0.0 area 0

C.

router ospf 1

redistribute connected 0.0.0.0

D.

router ospf 1
redistribute static subnets

Refer to the exhibit.

SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up Which configuration fixes the issue?

A.

Option A

B.

Option B

C.

Option C

D.

Option D