What is a role fulfilled by an Aruba Mobility Master (MM)?

A.

It forwards and routes traffic for wireless users across multiple sites.

B.

It terminates control tunnels for Aruba APs.

C.

It provides an advanced Web portal for onboarding Bring Your Own Device
(BYOD) devices.

D.

It manages VLAN and routing configuration for multiple Mobility Controllers (MCs).

An Aruba solution runs ArubaOS 8 and uses a mobility master architecture. Which feature
can network administrators use to balance wireless devices across APs on different
channels?

A.

AirMatch

B.

Client Match

C.

AppRF

D.

ARM

Refer to the exhibit.

The exhibit shows output from a Mobility Master (MM) dashboard. What is a valid reason for the administrator to click the akamai square under applications?

A.

to see the break down for only the roles, destinations, WLANs, and devices that use this application

B.

to download a report about the usage of this application over time

C.

to create filter rules in order to control wireless user access to this application

D.

to set up bandwidth rule in order to control wireless user access to this application

A company has a Mobility Master (MM)-based solution. A network administrator wants to monitor data transfer speed ranges of all currently connected clients.
Which dashboard page in the MM interface should the administrator visit?

A.

Security

B.

Performance

C.

Traffic Analysis

D.

Network

A company has a Mobility Master (MM) solution that manages Mobility Controllers (MCs) in
several groups. The company has several WebCC licenses and wants to reserve these
licenses for MCs in the Sunnyvale group only.
How can a network administrator achieve this goal?

A.

Associate the MAC addresses for the Sunnyvale MCs with the licenses when they are
generated.

B.

Make sure to be at the Managed Network > Sunnyvale level in the MM Interface
when the licenses are installed.

C.

Install the licenses on the MM, and allocate them to a dedicated local pool for the
Sunnyvale group.

D.

Install the licenses directly on the MCs in the Sunnyvale group, and activate the licneses
locally.

A company deploys an Aruba wireless solution for the first time. In which deployment is clustering supported?

A.

deployment as Mobility Masters (MMs)

B.

deployment as a standalone VMC

C.

deployment in 7000 Series standalone mode

D.

deployment in master-local mode

Refer to the exhibit

What describes the behavior for this WLAN?

A.

APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs
in the default group only.

B.

No APs broadcast the SSID. Clients cannot connect to the WLAN until administrators
activate it.

C.

No APs broadcast the SSID. Clients can connect to the WLAN on APs in the
default group only.

D.

APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs
in any group.

What is a valid way to deploy an Aruba Mobility Master (MM)?

A.

as a subscription-based service through the Aruba cloud

B.

as a role on a Mobility Controller 7030 that is deployed as a standalone controller

C.

as a virtual appliance on a server that meets the recommended hardware requirements

D.

as a role on a Mobility Controller 7240 that is deployed as a master controller

What is one difference between captive portal authentication and 802.1X authentication?

A.

802.1X authentication always authenticates the wireless client, while captive portal
authentication always authenticates the wireless user.

B.

802.1X authentication occurs at Layer 2, while captive portal authentication occurs at
Layer 3.

C.

802.1X authentication must use an LDAP server, while captive portal authentication can
use a RADIUS server or an LDAP server.

D.

802.1X authentication is typically implemented without encryption, while captive
authentication is often combined with WPA or WPA2.

A network administrator needs to configure firewall rules for three roles:
✑Finance
✑Sales
✑Employee
Several rules apply to both the Employee and Sales roles, but not to the Finance
role. What is the simplest way to configure these rules?

A.

Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.

B.

Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.

C.

Select either the Employee or Sales role, and then configure these rules within the global policy.

D.

Create a policy with these rules, and then apply that policy to the Employee and Sales roles.

Refer to the exhibit.

A network administrator creates a guest WLAN on an Aruba Mobility Master (MM). The
exhibit shows some of the settings for the WLAN.
How should the network administrator handle the Auth server settings?

A.

Add an authentication server with the LDAP type and the IP address of the company AD server.

B.

Add an authentication server with the LDAP type and IP address 10.10.10.10.

C.

Add an authentication server with the RADIUS type and IP address 10.10.10.10.

D.

Add an authentication server with the RADIUS type and the IP address of the company AD server.

Refer to the exhibit

A network administrator needs to use Aruba AirWave to view statistics for an AP’s
802.11ac radio. How can the administrator update the information on-demand rather than
wait the typical interval?

A.

Click Poll Controller Now

B.

Click the 802.11ac link

C.

Log out of the interface and log back in

D.

Refresh the browser