Topic 1, Volume A
Which of the following are examples of Time Division Multiplexing (Choose two)?
A.
Ethernet.
B.
Token-Ring.
C.
SONET/SDH.
D.
E1 carrier.
E.
PPP
SONET/SDH.
E1 carrier.
How many DS-3 frames can be transported in an OC-3 frame?
A.
A.
1
B.
2
C.
3
D.
4
3
Who was responsible for developing and publishing the original standard that was used for 10
Mbit/s Ethernet?
A.
Intel Corporation.
B.
Digital Equipment Corporation.
C.
DEC-Intel-Xerox.
D.
Apple Computer.
E.
IBM.
DEC-Intel-Xerox.
Which Ethernet frame field does the receiver use to verify the integrity of the received bits?
A.
Destination address
B.
Frame check sequence
C.
Preamble
D.
Length field
Frame check sequence
How is Ethernet II different from Ethernet 802.3?
A.
Ethernet 802.3 can only be used on point-to-point links, while Ethernet II can be used on
broadcast networks.
B.
In Ethernet II the 2 bytes after the source MAC address is used as a type indicator. In Ethernet
802.3 these two bytes indicate the length of the frame.
C.
In Ethernet 802.3, the 2 bytes after the source MAC address is used as a type indicator. In
Ethernet II these two bytes indicate the length of the frame.
D.
Ethernet II and Ethernet 802.3 are two different names for the same protocol
In Ethernet II the 2 bytes after the source MAC address is used as a type indicator. In Ethernet
802.3 these two bytes indicate the length of the frame.
Given the Mac Address 00-20-60-ce-2b:28, which part is the Organizationally Unique Identifier
(OUI)?
A.
2b:28
B.
00-20
C.
ce-2b:28
D.
00-20-60
00-20-60
Which of the following type of addressing scheme delivers information from one source to all
devices who are members of a specific group?
A.
Anycast.
B.
Multicast.
C.
Broadcast.
D.
Unicast.
Multicast.
Which of the following is true of Ethernet half-duplex transmission?
A.
Half-duplex transmission is less efficient because the frame MTU is smaller.
B.
Half-duplex transmission is only 30-40% efficient because of collisions.
C.
Ethernet switches support half-duplex transmission only.
D.
All of the above
Half-duplex transmission is only 30-40% efficient because of collisions.
What is the meaning of carrier sense in the CSMA/CD algorithm?
A.
The host will retransmit the frame if it detects a collision during transmission.
B.
The host is able to detect the transmission speed of the Ethernet switch port to which the hostis
connected.
C.
The host will only transmit data when it detects that no other devices are transmitting.
D.
The host will only transmit upon a timer expiry.
E.
The host will only transmit when it receives the token.
The host will only transmit data when it detects that no other devices are transmitting.
What is the effective maximum rate of data transmission on a 10 Mbps full-duplex Ethernet link?
A.
5 Mbps.
B.
10 Mbps.
C.
15 Mbps.
D.
20 Mbps.
20 Mbps.
Which of the following Ethernet rates requires an optical cable to operate?
A.
10 Mb/s Ethernet.
B.
100 Mb/s Ethernet.
C.
1000 Mb/s Ethernet .
D.
There are copper and optical versions possible for all of these Ethernet data rates
There are copper and optical versions possible for all of these Ethernet data rates
What distance is supported using CAT-5 cabling for 10/100/1000 TX?
A.
100 m.
B.
500m.
C.
1 Km.
D.
10 Km.
100 m.
| Page 6 out of 19 Pages |
| 345678 |
| 4A0-100 Practice Test Home |
Real-World Scenario Mastery: Our 4A0-100 practice exam don't just test definitions. They present you with the same complex, scenario-based problems you'll encounter on the actual exam.
Strategic Weakness Identification: Each practice session reveals exactly where you stand. Discover which domains need more attention, before Nokia Scalable IP Networks exam day arrives.
Confidence Through Familiarity: There's no substitute for knowing what to expect. When you've worked through our comprehensive 4A0-100 practice exam questions pool covering all topics, the real exam feels like just another practice session.
Copyright © All Rights Reserved