Free 200-301 Practice Test Questions 2026

What is a requirement for nonoverlapping Wi-Fi channels?

A. different security settings

B. discontinuous frequency ranges

C. different transmission speeds

D. unique SSIDs

How does Rapid PVST+ create a fast loop-free network topology?

A. lt requires multiple links between core switches

B. It generates one spanning-tree instance for each VLAN

C. It maps multiple VLANs into the same spanning-tree instance

D. It uses multiple active paths between end stations.

Which type of IPv6 address is similar to a unicast address but is assigned to multiple devices on the same network at the same time?

A. global unicast address

B. anycast address

C. multicast address

D. link-local address

Refer to the exhibit

Which route must be configured on R1 so that OSPF routing is used when OSPF is up. but the server is still reachable when OSPF goes down?

A.

ip route 10.1.1.10 255.255.255.255 172.16.2.2 100

B.

ip route 10.1.1.0 255.255.255.0 gi0/1 125

C.

ip route 10.1.1.0 255.255.255.0 172.16.2.2 100

D.

ip route 10.1.1.10 255.255.255.255 gi0/0 125

Refer to the exhibit.

Packets received by the router from BGP enter via a serial interface at 209.165.201.10.Each route is present within the routing table. Which interface is used to forward traffic with a destination IP of 10.10.10.24?

A. F0/10

B. F0/11

C. F0/12

D. F0/13

An engineer must configure R1 for a new user account. The account must meet these
requirements:
* It must be configured in the local database.
* The username is engineer.
* It must use the strongest password configurable. Which command must the engineer
configure on the router?

A. R1 (config)# username engineer2 algorithm-type scrypt secret test2021

B. R1(config)# username engineer2 secret 5 .password S1$b1Ju$kZbBS1Pyh4QzwXyZ

C. R1(config)# username engineer2 privilege 1 password 7 test2021

D. R1(config)# username englneer2 secret 4 S1Sb1Ju$kZbBS1Pyh4QzwXyZ

Refer to the exhibit.

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Which action is taken by the data plane within a network device?

A. forwards traffic to the next hop

B. constructs a routing table based on a routing protocol

C. provides CLI access to the network device

D. looks up an egress interface in the forwarding information base

Drag and drop the Rapid PVST+ forwarding slate actions from the loft to the right. Not all actions are used.

Which interface mode must be configured to connect the lightweight APs in a centralized architecture?

A. WLAN dynamic

B. management

C. trunk

D. access

Which protocol uses the SSL?

A. HTTP

B. SSH

C. HTTPS

D. Telnet

Refer to the exhibit.

A. Option A

B. Option B

C. Option C

D. Option D