Free 200-301 Practice Test Questions 2026

Refer to the exhibit.

A. Option A

B. Option B

C. Option C

D. Option D

Refer to the exhibit.

How many JSON objects are represented?

A. 1

B. 2

C. 3

D. 4

An engineer is configuring remote access to a router from IP subnet 10.139.58.0/28. The domain name, crypto keys, and SSH have been configured. Which configuration enables the traffic on the destination router?

A. Option A

B. Option B

C. Option C

D. Option D

Refer to the exhibit

What is the next hop for traffic entering R1 with a destination of 10.1.2 126?

A. 10.165 20.126

B. 10.165.20.146

C. 10.165.20.166

D. 10.165 20.226

A network engineer must configure two new subnets using the address block 10 70 128 0/19 to meet these requirements:
• The first subnet must support 24 hosts
• The second subnet must support 472 hosts
• Both subnets must use the longest subnet mask possible from the address block
Which two configurations must be used to configure the new subnets and meet a requirement to use the first available address in each subnet for the router interfaces?
(Choose two )

A. interface vlan 1234
ip address 10.70.159.1 255.255.254.0

B. interface vlan 1148
ip address 10.70.148.1 255.255.254.0

C. interface vlan 4722
ip address 10.70.133.17 255.255.255.192

D. interface vlan 3002
ip address 10.70.147.17 255.255.255.224

E. interface vlan 155
ip address 10.70.155.65 255.255.255.224

What is a function of Opportunistic Wireless Encryption in an environment?

A. offer compression

B. increase security by using a WEP connection

C. provide authentication

D. protect traffic on open networks

Refer to the exhibit.

A. Option A

B. Option B

C. Option C

D. Option C

E. Option E

An engineer is tasked to configure a switch with port security to ensure devices that forward unicasts multicasts and broadcasts are unable to flood the port The port must be configured to permit only two random MAC addresses at a time Drag and drop the required< configuration commands from the left onto the sequence on the right Not all commands are used.

Refer to the exhibit.

A company is configuring a failover plan and must implement the default routes in such a way that a floating static route will assume traffic forwarding when the primary link goes down. Which primary route configuration must be used?

A. ip route 0.0.0.0 0.0.0.0 192.168.0.2 GigabitEthernetl/0

B. ip route 0.0.0.0 0.0.0.0 192.168.0.2 tracked

C. ip route 0.0.0.0 0.0.0.0 192.168.0.2 floating

D. ip route 0.0.0.0 0.0.0.0 192.168.0.2

Refer to the exhibit.

How should the configuration be updated to allow PC1 and PC2 access to the Internet?

A. Modify the configured number of the second access list.

B. Add either the ip nat {inside|outside} command under both interfaces.

C. Remove the overload keyword from the ip nat inside source command.

D. Change the ip nat inside source command to use interface GigabitEthernet0/0.

Refer to the exhibit.

An engineer is updating the R1 configuration to connect a new server to the management network. The PCs on the management network must be blocked from pinging the default gateway of the new server. Which command must be configured on R1 to complete the task?

A. R1(config)#lp route 172.16.2.2 255.255.255.248 gi0/1

B. R1(config)#jp route 172.16.2.2 255.255.255.255 gi0/0

C. R1(config>#ip route 172.16.2.0 255.255.255.0 192.168.1.15

D. R1(conflg)#ip route 172.16.2.0 255.255.255.0 192.168.1.5

Refer to the exhibit

A network engineer configures the Cisco WLC to authenticate local wireless clients against a RADIUS server Which task must be performed to complete the process?

A. Change the Server Status to Disabled

B. Select Enable next to Management

C. Select Enable next to Network User

D. Change the Support for CoA to Enabled.